This is a question our experts keep getting from time to time. Now, we have got the complete detailed explanation and answer for everyone, who is interested!
How can I reset my bt disk?
Resetting the disc that is linked to your hub (router) to its factory settings requires you to push the factory reset button on the back of the disc for approximately one second using a pin or paper clip. Watch the LED until it changes from solid purple to flashing blue to solid blue. Put this disc in standby mode. Turn on each of the other discs in turn, and then reset them to factory settings.
Why does my BT disc continually going orange?
Hello there, @RonnieGroves1989. The orange light indicates that the disc is located too distant from the other discs or the Hub. Have you attempted to move the disc to a different location? You will be able to find out where the best spot is to be using the MyBT app.
How can I tell whether the BT disc I have is operating properly?
Solid purple The process of loading your disc has begun. It will take around one minute and forty-five seconds for it to completely turn on. Warning: flashing red There is no connection between your disc and your Smart Hub 2 To connect via WPS or Ethernet, just follow the on-screen instructions. Orange Your disc is working okay In the best case scenario, you should attempt to move the disc closer to the hub or to one of the other discs.
Why is the color of my full BT home red?
If a disc is completely red, it indicates that it is disconnected from either the router or any other discs.
BT SmartHub 2 WiFi Disc
41 questions found in related categories
What is the operation of the BT Wi-Fi disc?
Wi-Fi Discs communicate with your hub to produce a single network that is uninterrupted from the basement to the attic. It is guaranteed that there will be no problems with the connection because the devices will automatically connect to the hub or disc that has the strongest signal. In addition to this, you need to upgrade your Wi-Fi connection so that you may stream high-definition video anywhere in your house.
Do BT Wi-Fi discs function properly when used with other brands of routers?
Yes. Only a BT Smart Hub 2 is compatible with the full Wi-Fi experience. If you choose to go with BT’s Whole House Wi-Fi service, however, you will be able to have a comparable service that is compatible with the broadband offered by other providers and other routers.
What’s wrong with my BT discs that they won’t play?
Stop using any discs that aren’t directly attached to your hub and power them down. You can do a factory reset on the disc that is linked to your hub (router) by pressing the Factory reset button for approximately one second with a pin or paper clip. You’ll find it on the back side of the disc. Watch the LED until it changes from solid purple to flashing blue to solid blue.
What will happen if I reset my BT router to factory settings?
You will lose any updates that you have made to your Hub, including changes to the name and password of your wireless network, if you restore your Hub to its factory defaults. After performing a reset to factory settings, you will be led step-by-step through the Smart Setup on each of your devices.
Do BT WIFI CDs operate with any hub?
They are compatible with any service provider. The black discs can only be used with the BT Smart Hub 2, thus that would not be with any other provider except from BT.
What kind of reputation do BT routers have?
The BT Smart Hub is without a doubt the most advanced and best-performing router that the firm has ever produced. It may not appear to be very much, but it is quick, has a reasonable range, and is simple to operate.
Does BT entire home support any router that you choose to use?
Note that in contrast to BT’s routers, the Whole House Wi-Fi will function with any router and with any ISP because it is not a router itself; rather, it simply replaces the Wi-Fi network that is already in place in your home.
Is the bandwidth for BT whole home 2.4 GHz?
Although BT Whole Home Wi-Fi provides dual-band connectivity – each disc is effectively a 4×4 MIMO 802.11ac router offering speeds of up to 1,733Mbits/sec over 5GHz and 800Mbits/sec over 2.4GHz – it does not surface two separate networks in the same way that a typical wireless router would. Instead, BT Whole Home Wi-Fi uses a single network that is split between the 5GHz and 2.4GHz frequency bands.
How can I strengthen the signal of my BT WiFi connection?
- Keep your hub out in the open; placing it in a cabinet or on the floor, where it will be hidden from view and the wireless signal will be disrupted, is not a good idea.
- You should try to set your hub in the center of your home. This will limit the number of walls that are slowing down your signal, which will allow you to obtain better wi-fi in more spots across the house.
How do I increase the range of my WiFi connection?
- Change the location of your router so that it is more convenient.
- Get a new and improved router.
- Purchase a mesh Wi-Fi kit.
- Invest in a wireless network booster or extension.
- Invest in an adaptor for powerline networking that also includes Wi-Fi.
- Change the frequency from 5GHz to 2.4GHz.
How do I link my disc player to my BT router?
- Connect the ethernet cable by first inserting one end of the cable into a yellow connector located on the back of the Hub, and then inserting the other end of the cable into a yellow port located on the disc.
- After a couple of minutes, the light on the Wi-Fi disc will begin to flash blue and will eventually turn a solid blue color.
- You may now remove the plug from the cable.
What gives my BT that purple flashing light?
When the purple light is flashing, it indicates that the hub is not connected to the internet. Be sure you check your cords. If it is still not functioning, you should contact BT…. You can try to restart it, but if the light doesn’t turn blue, you should contact BT.
Why does BT charge such high prices?
And the reason why it is so expensive is that BT and other carriers continue to invest in their networks to presumably give a quicker and more efficient Internet connection to all of their customers, particularly in rural areas. In today’s market, the monthly line leasing fee averages approximately £16.99.
Do I have to use a router provided by BT?
You are not required to make use of a BT Home hub in any way, shape, or form. You are permitted to use any BT WiFi hotspot as long as you are signed up for the service, as it is already included in the price of your subscription to BT Wifi. Several people on this site use third party routers, I use one.
Does BT charge to replace Home Hub?
If your contract has expired, you will be responsible for the cost of purchasing a new home hub. In most cases, you may prevent having to do that by renewing your contract and simultaneously seeking a replacement for a home hub that is malfunctioning. You solely pay postage charges.
Can you have too many BT WiFi discs?
Hello, the maximum number of CDs that can be used is 6.